- home
-
Products
- Products
- Metrici Custom Applications
- Metrici LPR
- Metrici LPR Parking Module
- Metrici LPR Toll Station Module
- Metrici LPR Weighing Module
- Metrici PPD
- Metrici Area Counter
- Metrici Line Counter
- Metrici QR Code Reader
- Metrici Container Code Recognition
- Metrici Thermal Analyzer
- Metrici Parking Terminals
- Metrici Car Kit
- Metrici Server Systems
- Metrici Observer Radar
- Metrici LED Display
- Metrici MultiController
- Metrici LAN Controller
- case studies
- Applications
- Resources
- news
- videos
- Contact
Request Demo →
Metrici MultiController
New Release · Version 3
Metrici MultiController
Now Thinner. Now Smarter to Install.All Connections Outside. Zero Case Opening.
The same proven LPR & Wiegand access control, RFID bridge — rebuilt in a thinner, smaller case with every connection accessible from the outside. Wire barriers, loops and RFID without ever opening the enclosure.
MultiController Front View
Backside and DIN Rail Ready
I/O Connections and Ethernet
MultiController Dimensions
What’s New
Version 3. Built for Faster Installs.
The MultiController V3 keeps every capability you rely on — and rethinks the case so installation is quicker, simpler and less error-prone.
New
All Connections Outside the Box
Every input, output and power connection is accessible from the exterior. Wire barriers, inductive loops, Wiegand readers and power without opening the enclosure. Fewer tools, less time on site.
New
Thinner, Smaller Case
The V3 enclosure is redesigned to be slimmer and more compact than previous generations. It fits in tighter mounting spaces and presents a lower profile on any installation surface.
Improvement
Faster Installation
With all I/O external, a technician can wire and commission the device in a fraction of the time. No case opening, no internal routing — connect and go.
Unchanged
Same Proven Capabilities
LPR bridge, Wiegand 26-bit, RFID, HTTP/RAW protocols, Ethernet — every feature from the V2 is present and fully operational. No compromise on functionality.
Unchanged
IP65 Rated Enclosure
The new case maintains the IP65 ingress protection rating — dust-tight and protected against water jets. Designed for permanent outdoor deployment in any climate.
Improvement
Easier Maintenance
When a connection needs checking or a cable replaced, the external I/O layout means the job is done from the outside. Less downtime, simpler service calls with the terminal strip.
External I/O Design
No More Opening the Case to Wire.
The MultiController V3 moves every connection point to the exterior of the enclosure. Inputs, outputs, power and communication — all accessible from the outside.
This means a cleaner, faster installation process. A technician mounts the unit, runs the cables to the external terminals, and the device is ready to commission. No tools to open the case, no internal cable routing, no risk of disturbing the PCB.
1
Mount the enclosure at the desired location — wall, pole or gate post
2
Run cables to the external terminal block on the outside of the case
3
Connect power, inputs (loops, sensors), outputs (barriers, lights) and Wiegand/RFID
4
Connect via Ethernet — configure through the web interface and start
How It Works
From Plate or Card to Barrier Open
The MultiController V3 receives LPR detections or card swipes, checks against the database, makes an access decision and commands barriers — all in one device.
01
LPR or RFID Event
A camera detects a licence plate, or a Wiegand card is presented. The MultiController receives the event from either source.
02
Database Check
The plate or card ID is checked against the Metrici database and/or the Wiegand Command Station — depending on the configured scenario.
03
Access Decision
If authorised, the MultiController sends a command via its digital outputs. It can open up to two barriers simultaneously, control traffic lights or trigger any other connected hardware.
04
Event Logged
Every detection, card read, decision and command is logged in the Metrici database and the Wiegand Command Center. Full audit trail, usable as a timesheet.
Capabilities
Every Feature. Same Power.
The V3 carries forward every capability of the MultiController — LPR bridge, Wiegand, RFID, dual connectivity and full database integration.
LPR + Wiegand Bridge
Synchronises license plate data with Wiegand card IDs in one interface. Associate a plate with a card — one badge solution for everything.
RFID Capability
Built-in RFID reading alongside Wiegand 26-bit protocol. One device handles cards, fobs and LPR simultaneously.
Controls 2 Barriers
Commands up to two barriers simultaneously via digital outputs. Can also drive traffic lights, sensors or any other connected hardware.
Multiple Protocols
HTTP over TCP/IP, RAW over UDP/IP, Wiegand 26 bits and RFID. Ethernet for flexible installation. No more WiFi.
Per-Employee Settings
Individual access rights per user. Segment access by gate, level, time or zone. Manage all settings from any computer on the network.
Unlimited ID Cards
No limit on Wiegand ID cards stored in the database. Suitable for large facilities and organisations of any size.
Timesheet Capable
Every plate and card detection is timestamped. The event log can be used directly as a working hours timesheet for staff.
Companion Camera
Pair a second camera for a different angle on each event. Both images stored together in the database for complete evidence.
Multi-Tasking
A single controller can handle multiple jobs simultaneously — reading inputs and commanding outputs across different scenarios at once.
Specifications
Hardware & Communication Specs
IP65-rated enclosure, wide operating temperature range and dual network connectivity — now in a thinner case with external I/O access.
Hardware
ProcessorHigh-performance, dedicated firmware
Input VoltagePoE
Digital Inputs2 × digital IN
Digital Outputs2 × digital OUT
Enclosure RatingIP65
Operating Temperature-20°C to +50°C
Case DesignV3 — thinner - 100x130x65 mm, external I/O
OriginDesigned & manufactured in Romania
Communication & Protocols
NetworkEthernet
Protocol 1HTTP over TCP/IP
Protocol 2RAW over UDP/IP
Access ControlWiegand 26-bit
RFIDBuilt-in
Wiegand IDsUnlimited
GenerationV3 — external connections
Complementary Solutions
Complete Access Control Stack
Combine the MultiController V3 with Metrici LPR for a fully integrated access control system — LPR, cards and barriers.
🔢
Metrici LPR
The AI recognition engine that feeds plate data to the MultiController. One detection triggers the entire access decision chain.
Learn more →🖧️
Metrici Parking Terminals
For installations that need pure network-based barrier control without Wiegand and contactless payment. Complementary to the MultiController in mixed environments.
Learn more →🅿️
LPR Parking Module
Deploy the MultiController at parking gates alongside the Parking Module for a fully automated, ticketless facility with card backup.
Learn more →
Ready to Upgrade?
Same Power. Easier Installation.
The MultiController V3 delivers every capability you know — in a thinner case with all connections outside. Install faster. Maintain easier. Perform the same.
✕
![]()
